Connect XTUNER-E3 with the car. After Wi-Fi or Bluetooth or WIFI connection, the indication light turn on red. If connect successfully, the indication light will turn to blue. Run the XTUNER-E3, and start to diagnose.
Step1:Choose your vehicle Model and Enter the diagnostic system
It will connect to ECU Then XTUNER E3 will show you the diagnostic menu:
Step2: Read ECU information Choose “ECU info” on diagnostic menu and XTUNER E3 OBD2 Scanner will show you:
Step3: Read DTCs Choose “Read DTCs” on diagnostic menu XTUNER E3 will show you:
Step4: Clear DTCs Choose “Clear DTCs” on diagnostic menu then XTUNER E3 will show you: Click OK to confirm erase DTCs
Step5: Read Data List Choose “Data List” on diagnostic menu and Select some items:
Select “ENGINE SPEED” and click on “Wave”, it will show you the engine RAM by line chart.
Then Click the “Record” button to start data recording, until and click Stop button to stop recording: Click the Play button, it will show the recording data list, select one of them and replay the recording data:
Besides these basic diagnostic function, XTUNER E3 OBDII Scanner can also perform well on other functions like Quick Test, Clear learning value, Data Stream, Actuations, Read freeze frame data, Read/Write VIN, Basic Reset, Control unit adaptations, Throttle adaptations, Air bleeding, Level calibration, Theft alarm Reset, Key programming, Oil change, Idle speed learning, Idle speed Adjustment, Ignition timing adjustment, Camshaft timing control learning, Maintenance functions, ECU Initial startup, ECU initialization, etc.